DESCRIPTION
:
P-51015 is Nylon 6 filled with 10% glass fiber. It is compounded with specially treated chopped glass and modified with additives to make parts with high mechanical properties and heat resistance. It is available both in natural and black
colour.
SPECIAL CHARACTERISTICS :
P-51015 is designed to have the following properties:
TECHNICAL DATASHEET :
Property |
Test
Method |
Unit |
P-51015
(N) |
P -
51015 (B) |
Special
Gravity |
ASTM-D-792 |
gm / cm3 |
1.13 -
1.15 |
1.20 -
1.25 |
|
Tensile
Strength |
ASTM-D-638 |
Kg/ cm2 |
400 - 600 |
500 - 700 |
|
Elongation
at break |
ASTM-D-638 |
% |
5 |
5 |
|
Flex.
Strength |
ASTM-D-790 |
Kg/ cm2 |
900 - 1100 |
900 - 1100 |
|
Flex. Mod. |
ASTM-D-790 |
Kg/
cm2 |
48000-52000 |
48000-52000 |
|
Izod Impact
Strength Notched |
ASTM-D-790 |
Kg/ cm2 |
5.5 - 6.5 |
5.5 - 6.5 |
|
Rockwell
Hardness |
ASTM-D-785 |
R-Scale |
110 dev 5 |
110 dev 5 |
|
Heat
Deflection Temp. @ 18.5 Kg/cm2 |
ASTM-D-648 |
Deg. C |
> 165 |
> 165 |
|
Water
Absorption |
ASTM-D-570 |
% |
< 2.0 |
< 2.0 |
PROCESSING GUIDE :
Pre Drying :
It is recommended to predry the granules in vacuum /air circulated ovens at 80/100 deg.C for 2-4 hr. using perforated trays.
Injection Moulding Parameters :
Temperature Setting
Zones |
Feed |
Compression |
Metering |
Nozzle |
Melt |
Mould |
Temperature |
190°C |
220°C |
230°C |
220°C |
220-240°C |
695-80°C |
Injection pressure : 750-1000Kg./cm.sq approx
Use of shut – off nozzle is recommended to avoid drooling
Application :
| Terminals
|
Bearing cage
|
Connectors
|
Bushes
|
| Fuse Box
|
Gears
|
Switch Parts
|
Knobs/Cams
|
| Motor Insulation Parts
|
|
|
Sockets
|
Delivery : It is supplied in the form of pellets packed in 25 Kgs weather proof bags.
This information is to the best of our knowledge. The values of different parameters and operating conditions listed above are guidance only and should not be used for drawing specifications. The results & operating conditions may vary depending on methods of test and manufacturing / testing equipments.
